1. Introduction

Welcome to Qiblasense, your personal guide to finding the Qibla direction with precision and convenience. This user manual is designed to help you set up and use your Qiblasense device effectively.

2.Getting Started

2.1. Initial Setup
Scan QR Code & Download the App:
- Use your smartphone to scan the provided QR code.
- Download and install the QiblaSense mobile application from the provided link.
Charge the Device:
- Use the included USB-C charging cable to connect your QiblaSense device to any USB power
source (adapter, laptop, or power bank).
- A full charge typically takes 1-2 hours.
- Once fully charged, unplug the cable before use.
Power On:
- Press the power button on the QiblaSense device to turn it on.
- Wait for the device to boot up. It will vibrate to confirm power status.
2.2. Syncing with the Mobile App
- Open the QiblaSense App: Launch the app on your smartphone.
-Press and hold on Qiblasense Device
- Find Qiblasense : Press the 'Find QiblaSense' button to start scanning for available devices. Make sure Bluetooth is turned on.
- Connect Mechasense : Tap on your QiblaSense device when it appears in the list.
- Sync with Your Mobile: Follow on-screen instructions to complete pairing. You'll receive a
confirmation message upon success

3.Usage

Turn on device by pressing the frontal button. You will hear a distinct click sound.  

You will feel a single vibration confirming the device is active. Keep it pressed to keep it active.

Slowly circulate around, when the device is pointed towards Qibla you will feel a double vibration. It will keep vibrating until you release the button.  

4.Charging the Device

- Charging Port: USB-C
- Plug the USB-C cable into the charging port on the QiblaSense device.
- Connect the other end to any standard USB power source.
- Charging indicator will turn off or change color when fully charged.
- Recommended charge time: 1-2 hours.
- Always unplug after charging to prevent overcharging.

5.Troubleshooting

Issue: Device not turning on
Solution: Ensure it is fully charged. Try a different USB-C cable/port.

Issue: No device found (in app)
Solution: Make sure Bluetooth is enabled and the device is powered on.

Issue: No Qibla vibration feedback
Solution: Recalibrate by waving device gently and restart if needed.

Issue: Connection problems
Solution: Restart both phone and device; retry Bluetooth pairing

6.Warranty information

QiblaSense is committed to providing high-quality products and customer satisfaction
Limited Warranty:
QiblaSense warrants its products to be free from defects in materials and workmanship under
normal use for a period of [insert duration] from the purchase date.
Coverage Includes:
- Malfunctions under normal usage.
- Charging or connectivity issues not caused by misuse.
Warranty Excludes:
- Damage from drops, water, tampering, or unauthorized repairs.
- Use of non-certified charging accessories.
This warranty is non-transferable and valid only for the original purchaser.
Legal Rights:
This warranty gives you specific legal rights; additional rights may vary by jurisdiction..

8.Contact us

For support, warranty service, or general inquiries:
Email: support@qiblasense.com
Website: www.qiblasense.com